I’m having problem with Export Fail.
It happened when I was heavily editing an audio [meaning cutting, moving snipets etc. but no filters, no transitions nothing]. It was immediately going to fail.
I researched everywhere.
The Parallel Processing is disabled.
Use hardware encored is enabled.
As per all online instructions.
I still can’t export. I even tried a different VERY simple project. 2 short videos with 2 transitions. NOTHING.
Gets stuck at 12/13% and doesnt move.
This is what I get: plugin_mgr_get_object_file_plugins: error opening shared object file ‘C:\Program Files\Shotcut\lib\ladspa/AUTHORS’: “C:\Program Files\Shotcut\lib\ladspa\AUTHORS”: The specified module could not be found.
plugin_mgr_get_object_file_plugins: error opening shared object file ‘C:\Program Files\Shotcut\lib\ladspa/COPYING’: “C:\Program Files\Shotcut\lib\ladspa\COPYING”: The specified module could not be found.
plugin_mgr_get_object_file_plugins: error opening shared object file ‘C:\Program Files\Shotcut\lib\ladspa/readme.txt’: “C:\Program Files\Shotcut\lib\ladspa\readme.txt”:
[h264 @ 0000000005d24200] Reinit context to 1280x720, pix_fmt: yuv420p
[h264 @ 0000000005d13f00] Reinit context to 1280x720, pix_fmt: yuv420p
[h264 @ 0000000005d14840] Reinit context to 1280x720, pix_fmt: yuv420p
[producer avformat] audio: total_streams 1 max_stream 1 total_channels 2 max_channels 2
[AVIOContext @ 0000000003a5a040] Statistics: 32768 bytes read, 0 seeks
[producer avformat-novalidate] C:/Users/ewaka/Desktop/youtube/P3/Part 1.mp4
missing hwaccel parameters. skipping hardware initialization
[producer avformat-novalidate] C:/Users/ewaka/Desktop/youtube/P3/Part 1.mp4
checking VFR: pkt.duration 512
[h264 @ 000000000e17f000] Reinit context to 1280x720, pix_fmt: yuv420p
[swscaler @ 000000000faa36c0] Warning: data is not aligned! This can lead to a speed loss
[h264_qsv @ 0000000005d15a80] Initialized an internal MFX session using hardware accelerated implementation
[h264_qsv @ 0000000005d15a80] Using the constant quantization parameter (CQP) ratecontrol method
[h264_qsv @ 0000000005d15a80] profile: high; level: 31
[h264_qsv @ 0000000005d15a80] GopPicSize: 15; GopRefDist: 3; GopOptFlag: closed ; IdrInterval: 0
[h264_qsv @ 0000000005d15a80] TargetUsage: 5; RateControlMethod: CQP
[h264_qsv @ 0000000005d15a80] QPI: 19; QPP: 24; QPB: 31
[h264_qsv @ 0000000005d15a80] NumSlice: 1; NumRefFrame: 2
[h264_qsv @ 0000000005d15a80] RateDistortionOpt: OFF
[h264_qsv @ 0000000005d15a80] RecoveryPointSEI: OFF IntRefType: 0; IntRefCycleSize: 0; IntRefQPDelta: 0
[h264_qsv @ 0000000005d15a80] MaxFrameSize: 345600; MaxSliceSize: 0;
[h264_qsv @ 0000000005d15a80] BitrateLimit: ON; MBBRC: OFF; ExtBRC: unknown
[h264_qsv @ 0000000005d15a80] Trellis: auto
[h264_qsv @ 0000000005d15a80] VDENC: OFF
[h264_qsv @ 0000000005d15a80] RepeatPPS: OFF; NumMbPerSlice: 0; LookAheadDS: 2x
[h264_qsv @ 0000000005d15a80] AdaptiveI: unknown; AdaptiveB: unknown; BRefType: off
[h264_qsv @ 0000000005d15a80] MinQPI: 0; MaxQPI: 0; MinQPP: 0; MaxQPP: 0; MinQPB: 0; MaxQPB: 0
[h264_qsv @ 0000000005d15a80] Entropy coding: CABAC; MaxDecFrameBuffering: 2
[h264_qsv @ 0000000005d15a80] NalHrdConformance: OFF; SingleSeiNalUnit: ON; VuiVclHrdParameters: OFF VuiNalHrdParameters: OFF
[h264_qsv @ 0000000005d15a80] FrameRateExtD: 1; FrameRateExtN: 30
[consumer avformat] Could not open ‘C:/Users/ewaka/Desktop/youtube/P3/project.mp4’
[aac @ 0000000005d15f00] Qavg: nan
Does it fail at the same place? If so calculate whereabouts that is in the clip (12% of the total length) and see if you have any filters that start/end around there. Try disabling these and see if they might be the cause of the problem.
I tried various projects.
The audio project I was editing failed straight away.
I thought that maybe because it was cut and adjusted in too many place to handle.
So I tried a very simple project.
Like 2 clips 10 seconds each with one or two transitions.
I tried few of these simple projects.
All fail at around 11/12/13 % mark.
La dernière ligne de votre message mentionne qu’il ne peut pas ouvrir ce fichier. Existe t’il vraiment à cet emplacement? Quelles sont ses protections ou autorisations ?
The last line of your message mentions that it cannot open this file.
Does it really exist in this location?
What are its protections or permissions?
I am aware of this.
Though it doesn’t answer my question.
It basically fails/freezes at any edited part, which prevents basic usage.
I looked at that thread too but it doesn’t help really.
I’ve added to this post one of the logs of the simple project.
What any project seems to share in common is the:
This is what I get: plugin_mgr_get_object_file_plugins: error opening shared object file ‘C:\Program Files\Shotcut\lib\ladspa/AUTHORS’: “C:\Program Files\Shotcut\lib\ladspa\AUTHORS”: The specified module could not be found.
plugin_mgr_get_object_file_plugins: error opening shared object file ‘C:\Program Files\Shotcut\lib\ladspa/COPYING’: “C:\Program Files\Shotcut\lib\ladspa\COPYING”: The specified module could not be found.
Those messages are normal - don’t worry about them.
Are you using the latest version of Shotcut? Since it seems to be happening on several projects, some of them simple, have you tried re-installing Shotcut with the option to recreate registry items?