Insert emojis in Shotcut

I just realized that if for any reason I need to insert emojis in a project, there is a pretty fast and easy way to do it.

On Windows the keyboard shortcut Win+. opens the Emoji Picker and you can use it to display simple monochrome emojis with a Text filter.
Win+; works too

On a Mac, using Ctrl+Cmd+Space OR Fn+E opens the Character Viewer, which includes emojis and other symbols. I don’t own a Mac, so I couldn’t test if it works though.

Hope this is helpful for those who, like me, live under a rock and didn’t already know that trick.

7 Likes

Glaxnimate has much fancier Emojis FYI

  1. From the menu Layers > New > Emoji…
  2. Select a Set/Style
  3. Click Download and wait for the green checkbox to appear (only needed once per set if not yet downloaded)
  4. Click Add Emoji…
  5. Size, move, and animate as needed
4 Likes

That’s what I’ve been doing. But it’s good to know there is faster way when you don’t need fancy multicolored emojis :slight_smile:

3 Likes

Wow, that’s so nimble, man! But what would the keyboard shortcuts be in the MATE Desktop Environment?

I remember years ago working in a call center, I would flip the monitor to some coworkers!:

Ctrl + Alt + :arrow_down:

Yes, I live under a rock bigger than yours.
I didn’t even know the Windows shortcut. I use the touch keyboard in the taskbar.
Emoji

2 Likes

That is cool, @musicalbox. New to me. Great, I can now use it for emails too. Shame they don’t come out coloured in Shotcut, though…
Smiley face emoji in Shotcut

Another cool idea. I have enabled the touch keyboard. Thanks for the tip, @SergeC .
PS That makes three things I learned so far today. The other is that solder is actually almost 100% tin (Sn) with just a tiny bit of copper (Cu). I digress, though… :upside_down_face:

1 Like

They do with Text: Rich.


Note: Copied emoji from a Windows 10 computer. Not sure how well this works with other operating systems.

3 Likes

Oh, that’s great to know, @Hudson555x - thanks!

1 Like

I’ll digress too…
What are you soldering? Plumbing or electronics?
For electronics I’m still using lead based solder, despite the alledeged environmental and health issues. It’s easier to work with than lead-free solder: Lower melting point, better flow and better joints.

I’ve tried SnCu lead-free solder and didn’t like it at all.
But there are other types, like tin-silver (SnAg) and tin-silver-copper (SnAgCu) that are supposed to be better. I just ordered a small spool of SnAgCu to test it.
So thanks for the digression @jonray. Because of it, I may learn something else new too :slight_smile:

1 Like

Just a tiny bit of soldering in a microphone XLR cable which wasn’t working.
Here’s how I knew it was SnCu solder… The clue was in the packaging… :rofl::

Yes, I noticed it didn’t melt as quickly as lead-based. Fortunately I only had a tiny bit to do.

1 Like

What’s this topic about?
(I had 2 hours to spare…) :unamused::smirk:

3 Likes

Ha Ha!!! Summarises the thread perfectly! :rofl:
It went off in a bit of a tangent… :upside_down_face: :wink:

Ha ha !!! Ça résume parfaitement la discussion ! :rofl:
On a un peu dévié du sujet… :upside_down_face: :wink:

3 Likes