I ask about encoding

[mansalring]

Good morning

I am a user who frequently uses shotcuts.

Problems often occur during use, so it is difficult to work.
There are a lot.

I edit video 1 and video 2, but the playing time of the video
It is 00:25:00.

I dubbed with two videos, but after dubbing
To extract only audio, I exported a file with the aac option.

The time it takes for normal file export (after hardware setting)
It takes 00:01:30 minutes. After 3~4 work, it takes about 00:03:50
It often stretches or takes longer.

This is also good, but sometimes you have to work on one, save it as mlt, finish it, and load it again and save it as an audio file repeatedly.

There are so many cases like this that this product is free or free
Repeatedly ending the conversion, saving once, and exiting
I’m pretty embarrassed if I have to save it.

If I say that it could be if the computer’s specs drop
My computer has only 32GB of RAM.

The graphics card is 970gts and the cpu is AMD Tuban.

For reference, I have two computers, which are dozens of times higher than this one,
If you see the same problem occurring, it seems that this is not a computer problem, but a program problem.

I want to know what kind of situation is in this case…

I am working enough to change the video editing program
There is

[RilosVideos]

Hmm - hard to understand your problems - did you use a translator?
Anyway, 32 GB RAM should be enough for most tasks, even some demanding.
Graphic card doesn’t play a big role here, in my understanding.
You should use proxy editing and reduce the preview size to have a more responding preview -
that would help a lot i guess.
When you do a lot of editing, esp. apply different filters, the export time will rise quite a bit.
Without any filters export might take 1 min but with 5 filters it can easily take 5 min or more!
So export time really varies a lot, depending what filters you apply. Esp. the stabilize-filter will take a loooong time and is very cpu-demanding.