I’ve been getting a blue screen with the error message “Driver Power State Failure”
I restarted my laptop and it got fixed but it keeps showing randomly in every 5 mins and I don’t know how to fix it.
Any suggestions or links would help.
P.S. I have already gone through the first page of Google by searching the error. No Luck
How is this related to Shotcut?
Sometimes looking through Microsoft’s Forum may actually help with especially with such recent dates.
Oh yea, this is on Page 1.
I found some threads related to Windows Errors on Shotcut itself. That’s why I thought to maybe give a shot.
Also, I’ve gone through the Microsoft forum and they ask to contact the support team. Also, I am not a techie to understand the errors enough.
Sorry if I’ve asked the wrong question on this Forum.
this post in the forum, but it’s dealing with GPU settings, nothing to do with Shotcut directly.
Depending on the age of the laptop it may be failing unfortuantly(check it’s smart health) shotcut isn’t a cause of this however the extra load it applies during something like an export could certainly trigger it.
The laptop isn’t that old. I have a Dell Inspiron 15 7000.
Then verify the drive health using crystal disk info
Thanks for reaching out. This is the result of the test.
Although that drive is responding as “Good” by primary metrics it’s demonstrating a “Read Error Rate” and looking at the hex a non insignificant number of errors. If you still have support on your laptop I would contact dell to have them diagnose if it’s the drive or a mainboard issue.
@D_S suggested, I would also recommend you to contact the support team because you might not find a proper solution on random errors.
However, if you want to give a last shot towards this error, then I’ll suggest you follow this.
Try all the steps mentioned here -
I have performed all suggested steps by downgrading GPU/Chipset drivers to original ones supplied by laptop manufacturer but BSOD still was present. I’ve done whole procedure twice with reboots etc to make sure there is no remains of old drivers on my system… Still no luck.
Problem its definitely caused by OPTIMUS technology which switches between 2 GPU to save power … and fact that Shotcut isn’t compatible with it.
Even when settings are set to run with Intel GPU only, Shotcut is…
Next step, Go to through these links and check all the fixes
Hi All for the past days I've bumped into BSOD Driver Power State Failure quite a few times. All my drivers are up to date, but I suspect my BIOS not to be. My BIOS version is: CDCN26WW, 12-10-15. Could the problem be around the BIOS?
Lastly, stop asking irrelevant questions in the forums.
Hi, I am really sorry for putting it in the Shotcut forum. Anyway, I’ll try all of what you mentioned.
This topic was automatically closed after 90 days. New replies are no longer allowed.